Here is a glance at our new eDrum trigger project. We call it REMO X. Taking from some of the stuff we learned doing the X4L project, we decided to do a Remo practice pad conversion. Before you say, “Gee, like this hasn’t been done before”, keep in mind this Remo conversion is totally different
Now that I have built five of these triggers (two of which I used as guinea pigs for another ideas), I thought I would try to tweak my own design. Let me first say that, because of lack of funds and wanting to start another project, I will not be building the X4L any further
It’s time to get this eDrum working. In the last post we made the foam sensor coupling. In this post we will install the piezo/foam coupling assembly to the sensor plate and solder up the connections. We will be cutting 3M heavy duty double stick tape into small circles. Pull off a length of tape
I know it has been awhile since my last post, but I have been testing different types of foam sensors.? I have decided that the best one for the X4L electronic drum trigger is the one shown in the picture below.? I’ve been calling it the “tower” coupling.? I believe this to be easier to
It has come to my attention that the X4L eDrum trigger templates print (default mode) at the wrong scale on a PC. I mainly use a Mac so I have never experienced this problem. I asked my wife, who uses a PC at work, to print the templates out and see if they are scaled.