Facebook Twitter YouTube RSS
magnify

Alesis SamplePad Pro

Published on January 22, 2014 by in eDrum News

From Alesis Product Guide 2014:

Percussion Pad With Onboard Sound Storage

  • Play onboard sounds or load your own via the SD card slot
  • 10 ready-to-play kits with over 200 drum and cymbal sounds
  • 8 two-shot, isolated rubber pads with active blue LED illumination
  • Two additional pad inputs, plus kick and hi-hat trigger/switch inputs
  • Save sounds on SD card (up to 20 Kits), accessible via USB
  • LCD display and software utility for complete control
  • 1/4″ stereo outputs (L, R); 1/4″ headphone output
  • 1/8″ stereo aux input with level control; MIDI In & Out

For more: http://www.alesis.com/tradeshows/wnamm2014/alesis.html

 
Tags:
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 

Alesis Pro X Hi-Hat

Published on January 22, 2014 by in eDrum News

From Alesis Product Guide 2014:

Dual Cymbal Hi-Hat Controller For DM10 / DM8

  • 12” single-zone top and bottom cymbals
  • Authentic hi-hat playability and feel
  • Create open, half-open, closed, chick, and splash sounds
  • Compatible with any standard hi-hat stand
  • Includes top cymbal, bottom cymbal, clutch, and position sensor
  • Patent pending technology

For more: http://www.alesis.com/tradeshows/wnamm2014/alesis.html

 
Tags: , ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
11 Comments  comments 

Roland TM-2 Trigger Module

Published on January 15, 2014 by in eDrum News

Also new at NAMM from Roland is the TM-2 Trigger Module. This trigger module is designed for the acoustic drummer who wishes to add electronic drum sound/support to their set-up. It has inputs for two triggers, midi in & out, and can be run off of batteries. Another major feature for the TM-2 is an SD card slot for triggering one shot samples and loop phrases. For more information on the new Roland TM-2 Trigger Module, please visit: http://www.rolandus.com

 
Tags: ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 

Roland KT-10 Kick Trigger Pedal

Published on January 15, 2014 by in eDrum News

New at NAMM, the Roland KT-10 Kick Trigger Pedal. This new kick trigger pedal is designed to feel like a real bass drum pedal when played and not to take up too much space. Keep in mind, it doesn’t have to be used as just a kick drum trigger. A pedal trigger like this can be used to trigger any sound with you foot. Think cow bell or maybe wood blocks. For more information on this innovative trigger pedal, please visit: http://www.rolandus.com

 
Tags: ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 

Roland NE-10 / NE-1 Acoustic Sound Isolation for V-drums

Published on January 15, 2014 by in eDrum News

New at NAMM from Roland is this new sound isolation system called NE-10 & NE-1. The purpose of the isolation system is to reduce the vibration through the floor caused by the impact of the bass pedal beater or Hi-hat pedal bottoming out. The NE-10 is a pad designed to be placed under the pedal bass & trigger / Hi-hat foot board and the NE-1 are small round isolators designed to be used with the Roland KD-140/KD-120 kick triggers or for use with a hi-hat stand when using the Roland VH-13/VH-11 hi-hat controllers. For more information on the NE series Acoustic Sound Isolation, please visit: http://www.rolandus.com/

 
Tags: , ,
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
Copyright © 2008-2014, P.Boland, Cincinnati, Ohio
WordPress Theme by CyberChimps