http://www.hellfiredrums.com/archives/215 Hellfire Drums brings you DIY edrum projects and news from the edrumming industry. Wed, 25 Jan 2012 17:22:44 -0500 http://wordpress.org/?v=2.9.2 hourly 1 http://www.hellfiredrums.com/archives/215/comment-page-1#comment-381 Phil Sun, 02 May 2010 20:52:53 +0000 http://www.hellfiredrums.com/archives/215#comment-381 Well, if you are using an Alesis Trigger I/O or DM10 you can use this idea with only one input. Roland's dual zones tend to be piezo/switch (except the snare and aux) but the Alesis Trigger I/O and DM10 can do piezo/piezo. No Raper circuit and no separate inputs needed. Just something to keep in mind. Thanks for the comments cheapthrill. Well, if you are using an Alesis Trigger I/O or DM10 you can use this idea with only one input. Roland’s dual zones tend to be piezo/switch (except the snare and aux) but the Alesis Trigger I/O and DM10 can do piezo/piezo. No Raper circuit and no separate inputs needed. Just something to keep in mind. Thanks for the comments cheapthrill.

]]> http://www.hellfiredrums.com/archives/215/comment-page-1#comment-380 cheapthrill Sun, 02 May 2010 15:35:21 +0000 http://www.hellfiredrums.com/archives/215#comment-380 Hey Phil, I had that same idea for a separate bell on a two-zone ride, only I tried to make it work with a Raper circuit and failed due to the way they operate. This would still be great if using separate inputs and a plastic cymbal. Hey Phil, I had that same idea for a separate bell on a two-zone ride, only I tried to make it work with a Raper circuit and failed due to the way they operate. This would still be great if using separate inputs and a plastic cymbal.

]]>